SCOTT SBX 10 SUBWOOFER Instruction Manual download pdf (Page 4)

GB- 3

Bass volume control

Rotate the bass volume dial to adjust the volume.

Crossover frequency

Slide the switch to select the crossover frequency: 80, 120 or 160 Hz for different

bass effect. This setting is depending on the music content.

Phase adjustment

As different rooms have different influences on the bass, the phase switch is

used to compensate the room acoustic effect. Place the subwoofer as required,

listen to strong bass music and then set the PHASE switch to 0° or 180°. Use the

setting which gives a stronger bass effect. This is the best phase setting for your

listening room.

MAINTENANCE

Care and maintenance

To clean the casing, unplug the unit and wipe off dust and stains with a soft,

damp cloth. Do not use benzene, thinner or similar chemicals to clean the casing.

If at any time in the future you want to dispose of this product, please

note that electrical products should not be disposed of with household

waste. Find out where your nearest recycling centre is. Consult your

local authority or retailer for more details (Waste Electrical and

Electronic Equipment Directive).

TROUBLESHOOTING GUIDE

Problems Recommendations

1. The subwoofer does

not work properly

1.1 Slide the power ON/OFF switch at ON.

1.2 Reset the unit by unplugging the AC power cord

for few seconds, then plugging it back in.

1.3 The subwoofer alone cannot be paired. If

necessary carry out a new pairing.

TECHNICAL SPECIFICATIONS

Subwoofer

Power source AC 100-240V ~ 50/60Hz

Speaker 6.5”, 4 Ohm

Output power – Speaker 50 W (r.m.s.)

Power consumption 80 W

Standby power consumption < 1 W

Dimensions 341 (H) x 220 (W) x 220 (D) mm

Weight 6 Kg

Note: Due to continuing improvements, the technical specifications are subject to

change without notice.

1 2 3 4

No comments

SCOTT SBX 10 SUBWOOFER Instruction Manual Page 4